-
10-330kV Oil current and voltage transformer
-
33-220kV SF6 gas CT &VT
-
3-36kV Electronic instrument transformer（sensor）
-
0.5-36kV Indoor epoxy resin CT&VT
-
0.5-66kV Outdoor epoxy resin(silicone rubber) CT VT
-
6-66kV Reactor
-
0.22-220kV Surge Arrester
-
Monopole Inductive Voltage Transformer
-
20-220kV Monopole Inductive Voltage Transformer
-
33kV-220kV Capacitor Voltage Transformer
-
10kV 11kV 33kV 35kV CT PT Combind transformer
110kV Oil Immersed Dead Tank Current Transformer
Type description
L ------
Current transformer
B ------ 
With protective class
110---- Rated voltage (kV)
W3---- Pollution level
Scope
◆It is outdoor, single phase and oil immersed hair-pin type current transformer, which is used for metering and relay protection of 66~330kV, 50 or 60Hz system.
Standards
◆IEC 61869-1; IEC 61869-2
Service conditions
◆Ambient temperature: -40~+45℃
◆Altitude: ≤1000m (If above 1000m,the product will be customized according to user’s request)
◆Pollution level: II, III, IV
Design features
◆It is oil paper insulation structure. The main insulation is wound from high voltage cable paper, and is placed several capacitor screen of voltage division in the primary insulation, which can improve electric field distributing and decrease the consumption of insulation material. It will be immersed with transformer oil after desiccating under vacuum. It has advantages of stable and reliable performance of insulation, rich successful experience, a long life time.
◆Perfect fluidity performance of transformer oil is good for heat dissipation, it also has self recover ability for the failure of partial discharge caused by air bubble and dust.
◆The current ratio can be changed easily by switching the connection method of Primary winding to series or parallel.
◆Hermetically sealed stainless steel metallic bellows is installed on the top, which protect the transformer oil from moisture and extend the life time, also there is a oil level gauge on the bellows for observing the changing of oil volume.
◆Two optimization design external insulation types offered for user for inside and outside electric field without discharge
1. Composite insulator
2. High strength porcelain bushing
◆There is a multi function oil drain valve on the base, which make it more convenient for sampling, draining.
◆All adopted insulation parts are environmental protection material.
◆Secondary terminal board is made of epoxy casting, the seal performance is more reliable.
◆The base uses spray painting or hot galvanizing, which gives a high degree of corrosion resistance.
◆Fasteners and nameplate are stainless steel.
0411-83146175
Dalian Huayi Electric Power Electric Appliances Co., Ltd.
Address:
Pulandian District, Dalian City, Liaoning Province, China.
Tel:
0086-0411-83146175 (Domestic Sales) 0086-0411-83199993 (International sales)
Email:
HY83146175@163.com (Domestic sales) steven@cnhuayi.com.cn (International sales)
If you have any questions, please contact us
Traffic routes
Copyright ：Dalian Huayi Electric Power Electric Appliances Co., Ltd. 辽ICP备06004612号 power by 300.cn